Dalal Street Blogs provides information for educational purposes only and does not constitute investment advice. Please consult a SEBI-registered investment adviser before making any investment decisions.
CAUTION: Dalal Street Blogs publishes market news and educational content only. We do not promote, recommend or endorse any stock, and nothing here is a solicitation to buy or sell securities. Please consult a SEBI-registered adviser before investing.
Results

Inventory Write-Down in Results: What It Tells You About a Company

Inventory write-down in results: warehouse aisle with stacked cartons and pallets of stock on racks

Image by RobbieWi on Pixabay (Pixabay Content License)

By Dalal Street Blogs Editorial10 min read

An inventory write-down in results is one of those lines that rarely makes the headline, yet it can quietly eat a big chunk of a quarter’s profit. It shows up when a company admits that some of the stock sitting in its godowns is now worth less than what it cost to buy or make. If you track quarterly numbers, learning to spot it, and to judge whether it is a one-off or a warning sign, is worth the effort.

We will walk through what the accounting standard actually says, how the hit flows through the profit and loss statement, what happens when prices recover, and a few worked examples with simple illustrative numbers. Nothing here is complicated. It just needs a careful read of the notes.

In this article
  1. What an inventory write-down in results actually means
  2. Why stock loses value in the first place
  3. Worked example 1: a simple write-down
  4. Item by item, not by bucket
  5. Worked example 2: firm contracts change the answer
  6. Raw materials get a different test
  7. When prices recover: reversals
  8. Where to find it in the filings
  9. How to read an inventory write-down in results
  10. A note on events after the quarter
  11. Putting it into your results checklist

What an inventory write-down in results actually means

Indian listed companies follow Ind AS 2, the standard on inventories. Its core rule is short: inventories “shall be measured at the lower of cost and net realisable value” (paragraph 9 of Ind AS 2, as published on the Companies Act ready reckoner; the official text is on the Ministry of Corporate Affairs website).

So there are two numbers to compare for every item (or group of similar items):

  • Cost – purchase price, import duties and non-recoverable taxes, transport and handling, plus conversion costs for manufactured goods (paragraphs 10 and 11).
  • Net realisable value (NRV) – “the estimated selling price in the ordinary course of business less the estimated costs of completion and the estimated costs necessary to make the sale” (paragraph 6).

Whichever is lower becomes the carrying value. When NRV drops below cost, the gap is the write-down. That’s it. The company is not selling anything at a loss yet; it is simply refusing to carry an asset at more than it expects to recover.

Why stock loses value in the first place

Paragraph 28 of the standard lists the usual suspects. Cost may not be recoverable if inventories are damaged, if they have become wholly or partially obsolete, or if their selling prices have declined. It also flags the less obvious case: when the estimated costs to finish the goods, or to sell them, have gone up.

In practice, in Indian results you tend to see this in a few familiar settings:

  • Commodity price falls – a steel, metal or chemicals maker holding stock bought at higher prices when realisations slide.
  • Obsolescence – electronics, phones, fashion and seasonal goods that go out of date quickly.
  • Expiry and damage – pharma batches nearing expiry, or goods spoiled in storage.
  • Rising completion costs – a real estate developer whose unsold project now needs more money to finish than the flats will fetch.

Paragraph 28 puts the logic in one line: assets “should not be carried in excess of amounts expected to be realised from their sale or use.” Conservative, and sensible.

Worked example 1: a simple write-down

Let’s take a made-up mid-sized chemicals company. The figures below are purely illustrative, chosen to keep the arithmetic easy.

At the end of the quarter it holds 1,000 tonnes of a finished product. Cost is ₹50,000 per tonne, so inventory at cost is ₹5 crore (1,000 × ₹50,000). Market prices have softened, and the company now expects to sell at ₹48,000 per tonne. Freight and selling commission will cost about ₹3,000 per tonne.

  • NRV per tonne = ₹48,000 − ₹3,000 = ₹45,000
  • Total NRV = 1,000 × ₹45,000 = ₹4.5 crore
  • Write-down = ₹5 crore − ₹4.5 crore = ₹50 lakh

Notice something. The selling price (₹48,000) was only 4% below cost, but once selling costs are deducted the hit is 10% of the inventory value. Many readers miss this. NRV is not the market price; it is the market price after the costs of getting the goods out the door.

Under paragraph 34, that ₹50 lakh is recognised as an expense “in the period the write-down or loss occurs.” So it lands in this quarter’s P&L, typically inside cost of materials consumed or changes in inventories, and EBITDA takes the full knock.

NRV is not the market price. It is the market price after the costs of getting the goods out of the door, and that small difference is where a lot of write-downs come from.

Item by item, not by bucket

Here’s a detail that matters when you read management commentary. Paragraph 29 says inventories are usually written down item by item. Grouping similar items is allowed only in limited cases, for instance items in the same product line with similar end uses, produced and marketed in the same area, which cannot practically be evaluated separately.

What the standard does not allow is writing down on the basis of a whole classification, such as “all finished goods” or all inventory in one operating segment. Why does this matter to us as readers? Because a company cannot net a loss on one product against a gain on another in a different line to make the problem disappear. If product A is under water and product B is comfortably profitable, A still gets written down.

Worked example 2: firm contracts change the answer

Paragraph 31 adds a twist. NRV depends on why the stock is held. If inventory is earmarked for a firm sales contract, NRV for that quantity is based on the contract price. Only the excess quantity is measured at general selling prices.

Back to our illustrative chemicals company. Suppose 600 of the 1,000 tonnes are committed under a firm contract at ₹54,000 per tonne, with the same ₹3,000 selling cost.

  • Contracted 600 tonnes: NRV = ₹51,000 per tonne, which is above cost of ₹50,000. No write-down. Carried at cost: ₹3 crore.
  • Uncontracted 400 tonnes: NRV = ₹45,000 per tonne versus cost of ₹50,000. Write-down = 400 × ₹5,000 = ₹20 lakh.

The write-down falls from ₹50 lakh to ₹20 lakh. Same stock, same market, very different number. When a company with a strong order book reports a smaller write-down than a peer, this is often part of the reason, and it’s a fair one.

Raw materials get a different test

Paragraph 32 is kind to raw materials. Materials and supplies held for production are not written down below cost if the finished products they go into are expected to sell at or above cost. Only when a fall in material prices signals that the finished product’s cost now exceeds its NRV do the materials themselves get written down. In that case, replacement cost of the materials may be the best measure of their NRV.

So a fall in copper prices does not automatically trigger a write-down on copper held by a cable maker. If the cables still sell above their cost, the copper stays at cost. Worth remembering when you see a commodity crash and expect every user of that commodity to report a hit.

When prices recover: reversals

Write-downs are not permanent. Paragraph 33 requires a fresh assessment of NRV every period. If the circumstances that caused the write-down no longer exist, or there is clear evidence of higher NRV due to changed economic conditions, the write-down is reversed. But there’s a ceiling: the reversal is limited to the original write-down, so the stock goes back to the lower of cost and the revised NRV. It can never be marked above cost.

Paragraph 34 says the reversal is recognised as a reduction in the inventory expense for the period in which it happens.

Worked example 3: the reversal

Say our company did book the full ₹50 lakh write-down on 1,000 tonnes in one quarter (no contract this time), carrying the stock at ₹4.5 crore. Next quarter, before selling any of it, prices bounce and the expected NRV becomes ₹53,000 per tonne after selling costs.

  • Revised NRV total = ₹5.3 crore
  • Cost = ₹5 crore
  • New carrying amount = lower of cost and NRV = ₹5 crore
  • Reversal = ₹5 crore − ₹4.5 crore = ₹50 lakh (exactly the original write-down, not ₹80 lakh)

That ₹50 lakh reduces the inventory expense next quarter, so margins look better than the underlying business would suggest. If you are comparing quarter on quarter, you have to strip out both the hit and the write-back, or you will see a dip followed by a spike that tells you little about real demand.

A write-down in one quarter and a reversal in the next can make margins swing sharply even when nothing much has changed in the actual business.

Where to find it in the filings

Here’s the practical part. The quarterly results filed on the exchanges are condensed, so the write-down is often buried. You might find it in:

  • The notes to the results, especially when the amount is large enough for management to explain margin movements.
  • The exceptional items line, if the company treats a very large, unusual write-down as exceptional. We cover how to judge that line in our explainer on exceptional items in results.
  • The analyst presentation or earnings call, where management usually talks about inventory losses or gains in commodity businesses.

The annual report is where the full picture sits. Paragraph 36 requires the financial statements to disclose, among other things, the accounting policy and cost formula used, the total carrying amount of inventories by classification, the amount of inventories expensed in the period, the amount of any write-down recognised as an expense, the amount of any reversal, the circumstances or events that led to that reversal, and the carrying amount of inventories pledged as security for liabilities.

That reversal disclosure is useful. A company has to tell you why it reversed, which gives you a chance to check whether the explanation holds up against what you can see in prices.

How to read an inventory write-down in results

When we see one, these are the questions we ask:

  1. Is it price or product? A write-down because a commodity’s price fell is cyclical and may reverse. One driven by obsolete or expired goods points to poor planning and usually does not come back.
  2. How big is it versus inventory? Compare the write-down with the total inventory carrying amount. A small percentage is housekeeping. A large one says the stock was badly priced or badly chosen.
  3. Is inventory piling up? Look at inventory days. If they are rising quarter after quarter, a write-down may be the first visible symptom of slow-moving stock. Our guide to inventory days explains how to calculate it.
  4. Does it repeat? One write-down is an event. Write-downs every year are a pattern, and the “one-off” label starts to lose credibility.
  5. Was there a reversal? If margins jumped this quarter, check whether a reversal of an earlier write-down is helping. That boost will not recur.

A note on events after the quarter

Paragraph 30 says NRV estimates rely on the most reliable evidence available when the estimate is made. They can take into account price or cost changes after the period end, but only to the extent those events confirm conditions that already existed at the end of the period.

In plain terms, if prices had already started falling before the quarter closed and kept falling in the weeks before the board approved the results, that later data can inform the write-down. A fresh shock that arrives only after the quarter ends is a different matter. This is one reason why two companies in the same sector, with slightly different reporting dates, sometimes report quite different write-downs.

Putting it into your results checklist

An inventory write-down is not automatically bad news. Sometimes it’s simply honest accounting in a falling market, and the company that books it early is being more conservative than a peer that waits. The trouble starts when write-downs are large, repeated, or explained away too easily.

Our suggestion: when you go through a quarterly report, look at gross margin, inventory levels and any mention of NRV or inventory provisions together, not one at a time. If gross margin fell and the notes mention a write-down, work out how much of the fall it explains. Then think about whether the cause is likely to persist. For a structured way to go through the full set of numbers, see our guide on how to analyse quarterly results of a company.

The examples above use made-up numbers only to show the mechanics. Real companies apply judgement on NRV, groupings and contracts, and their auditors review it, so always read the actual notes before drawing conclusions.

Disclaimer: This article is for educational purposes only and is not investment advice. Please do your own research or consult a SEBI-registered investment adviser before making any investment decision.

Leave a Reply

Join the conversation

Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.

Sign up to comment Log in