A domestic and overseas fund of funds is a mutual fund that doesn’t buy shares or bonds itself. It buys units of other mutual funds, some investing in India and some investing abroad, and SEBI now insists that each side gets a real share of the money: at least 35% each. That one rule is what separates this category from a plain overseas FoF that might hold almost nothing at home.
We have covered the purely foreign variety in our piece on overseas fund of funds. This one is about the hybrid of geography: a single scheme that is supposed to give you both Dalal Street and the world. The rules sit in Annexure 1C of SEBI’s Master Circular for Mutual Funds (as on March 20, 2026), and they are more specific than most investors realise.
In this article
- Where the domestic and overseas fund of funds category comes from
- The three sub-categories, and the 35% floor in each
- Working out the range: what 35% each really allows
- Active, passive or “Omni”: how to read the name
- How many such funds can one AMC run?
- The benchmark rule
- The cost layer most people miss
- The overseas part has hard limits
- Currency: the risk hiding in the overseas half
- Who this category suits, and who should skip it
- A quick checklist before you invest
Where the domestic and overseas fund of funds category comes from
For years, the FoF space was loosely defined. The categorisation table in paragraph 3.8.5 of the master circular simply says a FoF, overseas or domestic, must put a minimum of 95% of total assets in the underlying fund. That’s it. It tells you the wrapper, not what’s inside.
The tighter structure came through a framework SEBI sent to AMFI, the mutual fund industry body, on June 30, 2025. Paragraph 3.8.6 points to it, and it is reproduced as Annexure 1C. It applies to every FoF that has more than one underlying fund, and it sorts them into six broad buckets: equity oriented domestic, debt oriented domestic, hybrid domestic, commodity based domestic, overseas, and finally “domestic and overseas”. The last bucket is our subject.
The three sub-categories, and the 35% floor in each
Annexure 1C lists three kinds of domestic and overseas FoF. All three carry the same core condition: the minimum investment in underlying domestic schemes and in underlying overseas schemes should be at least 35% each.
- Diversified Equity FoF. Invests in domestic and overseas equity oriented schemes. The underlying schemes should not be based on factors like momentum or quality. So a fund that buys an Indian momentum index fund plus a US quality index fund cannot call itself diversified.
- Sectoral or Thematic Equity FoF. Invests in domestic and overseas equity schemes built around a single sector, a single theme, or multiple sectors. Think of a technology FoF that holds an Indian IT fund and a global tech fund.
- Debt oriented FoF. Invests in domestic and overseas debt oriented schemes, again with the 35% floor on each side.
Notice what the rule does not say. It does not fix the split at 50:50. It fixes the minimum. Everything above the two floors is the fund manager’s call, within whatever range the scheme information document (SID) promises.
The 35% floor is a promise about the minimum, not the mix. Two funds with the same label can sit at very different points between home and abroad.
Working out the range: what 35% each really allows
Let’s put numbers on it. This is a hypothetical example to show the arithmetic, not any real scheme.
Say you put ₹1,00,000 into a domestic and overseas diversified equity FoF.
- The domestic floor of 35% means at least ₹35,000 sits in Indian equity schemes.
- The overseas floor of 35% means at least ₹35,000 sits in foreign equity schemes.
- That leaves ₹30,000, or 30% of the money, that can lean either way.
So if the fund were fully invested in underlying schemes, the domestic share could range from 35% up to 65%, and the overseas share would be whatever is left, again between 35% and 65%. In practice the ceiling is a bit lower, because the general FoF rule only requires 95% in underlying schemes, and a small slice may sit in cash or similar instruments. Annexure 1C adds that this remaining portion must not run against the scheme’s strategy.
Why does this matter to us as investors? Because two funds in the same category can behave very differently. A fund sitting at 65% India and 35% abroad will feel like an Indian equity fund with a foreign seasoning. A fund at 35% India and 65% abroad will move far more with US or global markets and with the rupee. Same label, different ride. The factsheet and the portfolio disclosure tell you where the manager actually stands, so check them before you buy, and again every few months.
Active, passive or “Omni”: how to read the name
Annexure 1C lets an AMC launch each FoF category in three flavours:
- Active option: the FoF invests in multiple actively managed funds.
- Passive option: it invests in multiple passive funds such as index funds and ETFs.
- Active and passive option: a mix of both.
The nomenclature table in Annexure 1C(iii) then forces this into the scheme name. For the diversified equity variety, the formats read like “<Mutual Fund name> domestic and overseas diversified equity <distinct keyword> Active FOF”, the same with “Passive FOF”, or “Omni FOF” for the mixed active-and-passive version. The table also says that when the underlying schemes span up to two market-cap buckets, such as large plus midcap or flexicap plus multicap, those caps are named; if they span more than two, the words “all cap” are used.
The practical upshot is simple. When you see “Omni” in a FoF name, it means the fund mixes active and passive underlying schemes. When you see “domestic and overseas”, the 35% floors apply. The name is doing work for you, so read it slowly.
For sectoral and thematic variants, the format inserts the sector, theme or “multi sector” into the name, again ending in Active, Passive or Omni FOF. For debt, a scheme built on a single debt category names that category, and one spread across debt categories uses a distinct keyword. Annexure 1C(iii) gives examples of such keywords: ‘Short Duration + Credit Risk’ or ‘Overnight+Liquid’.
How many such funds can one AMC run?
SEBI caps the count, which keeps fund houses from launching near-identical schemes to fill shelf space. Annexure 1C(iv) sets these limits for the domestic and overseas category, separately for each of the three options:
- Diversified Equity FoF: 2 schemes per option.
- Sectoral or Thematic Equity FoF: 1 scheme per sector, theme or multi-sector, per option.
- Debt oriented FoF: 2 schemes per option.
Older schemes that already exceed these numbers are grandfathered, but the AMC cannot launch new ones in that sub-category. The framework also says an AMC can merge existing FoFs to come within the limit, or seek grandfathering if a merger isn’t workable because of scheme features or investment objective.
The benchmark rule
Benchmarks are where a fund’s performance gets judged, so they matter more than they look. Annexure 1C(ii) says a domestic and overseas FoF should use the benchmark of the underlying overseas schemes or a broad market benchmark, and that the weightages of these benchmarks should be at least the minimum of the investment range or duration and credit profile of the particular overseas underlying fund, as set out in the SID.
Read plainly: the benchmark should reflect what the fund actually holds. A fund carrying a large chunk of foreign equity shouldn’t be measured against a purely Indian index, and vice versa. When you compare returns, compare them against the benchmark the fund itself names, and look at whether that benchmark sensibly blends the two sides.
The cost layer most people miss
Every FoF has two layers of expense. You pay the FoF’s own recurring expenses, and the underlying schemes charge theirs too. SEBI doesn’t hide this; paragraph 4.1.1 of the master circular requires the SID and advertisements of a FoF scheme to disclose that investors bear the recurring expenses of the scheme in addition to the expenses of the underlying schemes. Paragraph 4.1.2 bars the AMC from any revenue sharing arrangement with the underlying funds, and any commission or brokerage received from them must be credited to the scheme’s account.
Here’s a hypothetical illustration. Suppose a FoF charges 0.50% a year, and its underlying schemes charge a weighted average of 0.80%. Your all-in drag is roughly 1.30% a year. On ₹1,00,000 that’s about ₹1,300 annually before any return. That number is invented for the example, but the structure is real, and it is why the FoF route is not automatically cheaper than buying a domestic fund and an overseas fund separately. Check both expense layers in the SID and the factsheet.
A FoF is a fund of funds and a fee on fees. The convenience is real; so is the second layer of cost.
The overseas part has hard limits
The “overseas” half isn’t unlimited either. Paragraph 13.11 of the master circular lists what mutual funds may hold abroad, including units of overseas mutual funds or unit trusts registered with overseas regulators. Paragraph 13.11.2 then sets ceilings in US dollars:
- Overseas securities: US $1 billion per mutual fund, and US $7 billion for the industry as a whole.
- Overseas ETFs: US $300 million per mutual fund, and US $1 billion for the industry.
Within the US $7 billion industry figure, each mutual fund has a reserved quota of US $50 million. For ongoing schemes, paragraph 13.11.4 gives an investment headroom of 20% of the average AUM in overseas securities or overseas ETFs over the previous three calendar months, available for that month, within the maximum limits.
Why should a retail investor care about a fund house’s dollar quota? Because a domestic and overseas FoF must keep at least 35% abroad. If a fund house is short of room to add overseas exposure, it has less flexibility to keep that side topped up as fresh money comes in. It’s worth reading the latest SID addenda and AMC notices before you start a large SIP into any scheme with an overseas leg.
Annexure 1C also says the AMC must select only those underlying overseas schemes that have exposure to securities as defined under the Securities Contracts (Regulation) Act, 1956, and other applicable rules. So the foreign leg is meant to hold proper securities, not exotic structures.
Currency: the risk hiding in the overseas half
When you own an overseas fund through a rupee FoF, your return has two parts: what the foreign assets did in their own currency, and what the rupee did against that currency. A hypothetical case makes it clear. If the overseas holdings rise 8% in dollar terms over a year and the rupee weakens 3% against the dollar over the same period, the rupee value of that leg rises by about 11.2% (1.08 × 1.03 = 1.1124). If the rupee strengthens 3% instead, the gain shrinks to about 4.8% (1.08 × 0.97 = 1.0476).
With at least 35% of the money abroad, this effect is never trivial in a domestic and overseas FoF. Some investors want that, as a hedge against a weakening rupee. Others find the extra swing uncomfortable. Either way, it should be a choice you make knowingly, and it ties straight into how you size positions; our guide to risk management in trading covers that thinking in more detail.
Who this category suits, and who should skip it
It can make sense if you want a single holding that guarantees some global diversification without having to rebalance two separate funds yourself. The 35% floors mean neither side can quietly vanish. For a small portfolio, that one-fund simplicity has value.
It suits you less if you already hold a broad Indian equity fund such as a flexi cap fund and only want a measured slice of foreign exposure. In that case you may be doubling up on India and paying two layers of fees for the overseas bit. Investors who want gold, silver or debt mixed in may look at a multi asset fund of funds instead, which is a different category with its own floors.
A quick checklist before you invest
- Confirm the sub-category: diversified equity, sectoral or thematic equity, or debt.
- Check the current domestic versus overseas split in the latest factsheet, not just the 35% minimums.
- Read the name for Active, Passive or Omni so you know what kind of underlying funds it holds.
- Add up both expense layers from the SID and factsheet.
- Look at the stated benchmark and whether it reflects both sides of the portfolio.
- Check AMC notices for any restriction on fresh inflows tied to overseas limits.
- Decide whether you want the currency exposure that comes with the overseas leg.
Scheme documents and factsheets are published by each AMC, and the industry body AMFI is a useful starting point for finding scheme lists. The category rules themselves are in Annexure 1C of the SEBI master circular linked above.
Disclaimer: This article is for education only and is not investment advice. Mutual fund investments are subject to market risks; read all scheme-related documents carefully. Please consult a SEBI-registered investment adviser before making investment decisions.





Leave a Reply
Join the conversation
Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.
Sign up to comment Log in