The book to bill ratio is one of the quickest checks you can run on a capital goods or engineering company’s quarterly results. It takes the value of new orders a company won in a period and divides it by what it actually billed, its revenue, in the same period. Above 1, the company is booking work faster than it is delivering it. Below 1, it is eating into its backlog. That one number, read properly, tells you a lot about where revenue might be heading two or three years out.
We’ll keep this practical. Below is the formula, a worked example with made-up numbers, then the real thing using Larsen & Toubro’s (L&T) Q2 FY27 investor presentation, where the ratio swings from about 0.6 to above 4 depending on which business you look at.
In this article
- What the book to bill ratio measures
- Order inflow, order book and revenue: how they connect
- A worked example with simple numbers
- Book to bill ratio in L&T’s Q2 FY27 results
- Why the group number can mislead: split it by segment
- How to use the ratio when reading results
- Where the book to bill ratio applies, and where it doesn’t
What the book to bill ratio measures
The definition is simple. Wikipedia’s entry on the book-to-bill ratio describes it as the ratio of orders received to the amount billed for a specific period, usually a month or a quarter. A ratio above one means more orders came in than were filled, which points to strong demand. A ratio below one points to weak demand.
The formula:
Book to bill ratio = Order inflow during the period ÷ Revenue (billings) during the period
Two things to get right before you calculate anything. First, both numbers must cover the same period. Quarterly inflow over quarterly revenue, or yearly over yearly. Mixing a quarter’s inflow with a year’s revenue gives you nonsense. Second, use the same scope. If a company reports order inflow for the consolidated group, divide by consolidated revenue, not standalone.
The ratio is a staple of the global semiconductor equipment industry. Industry body SEMI publishes a monthly book-to-bill report for North American chip equipment makers, and its Japanese counterpart SEAJ publishes one too, both built on three-month moving averages. Most Indian results releases we read don’t quote it as a headline number. They give you the raw ingredients instead: order inflow, order book and revenue. You do the division yourself.
Order inflow, order book and revenue: how they connect
Three terms show up in every engineering company’s results, and people mix them up all the time.
- Order inflow is the value of new contracts signed during the quarter. It is a flow number.
- Order book (or backlog) is the value of work already contracted but not yet executed, as on a date. It is a stock number.
- Revenue is the work executed and billed during the quarter.
Roughly, the order book moves like a tank of water. Inflow pours in, revenue drains out:
Closing order book ≈ Opening order book + Order inflow − Revenue booked from that backlog
It’s only roughly, because real companies also adjust the book for currency moves, cancelled or descoped contracts and price variation clauses. But the logic holds. When the book to bill ratio stays above 1 for several quarters, the order book grows. When it stays below 1, the book shrinks unless the company has a huge cushion to start with.
Book to bill tells you which way the backlog is moving. The order book tells you how big the cushion already is. You need both.
A worked example with simple numbers
Take a hypothetical switchgear maker. These figures are purely illustrative, not any real company’s.
- Opening order book on 1 July: ₹2,400 crore
- Order inflow in the July–September quarter: ₹1,000 crore
- Revenue in the same quarter: ₹800 crore
Book to bill = 1,000 ÷ 800 = 1.25. The company signed ₹1.25 of new work for every rupee it billed.
Closing order book ≈ 2,400 + 1,000 − 800 = ₹2,600 crore.
Now look at revenue visibility. If quarterly revenue stays near ₹800 crore, annual revenue runs at about ₹3,200 crore. The closing book of ₹2,600 crore covers about 0.8 years of that run-rate (2,600 ÷ 3,200). That’s a second ratio analysts love, usually called order book to revenue or “years of visibility”.
Change one input and see how the story flips. Suppose inflow was only ₹600 crore. Book to bill falls to 0.75 and the closing book drops to ₹2,200 crore. Revenue for the quarter is the same ₹800 crore, so the income statement looks identical. The difference only shows up in the order data, and it shows up first. That’s the whole point of tracking this ratio: it moves before revenue does.
Book to bill ratio in L&T’s Q2 FY27 results
Now the real numbers. All figures below come from L&T’s Q2/H1 FY27 earnings call presentation dated October 27, 2026. The ratios are our own calculations from those figures.
For the July–September 2026 quarter, L&T reported consolidated order inflow of ₹1,47,665 crore against consolidated revenue of ₹78,750 crore. That gives a book to bill of about 1.88. A year earlier, in Q2 FY26, inflow was ₹1,15,784 crore against revenue of ₹67,984 crore, a ratio of about 1.70. Business Standard’s report on the results carries the same inflow, revenue and order book figures. Our own news write-up of L&T’s Q2 results covers the profit side.
For the half year, H1 FY27 inflow of ₹2,55,678 crore against revenue of ₹1,46,692 crore works out to about 1.74, up from about 1.60 in H1 FY26 (₹2,10,237 crore of inflow on ₹1,31,662 crore of revenue).
The longer trend is even more telling. The presentation restates five years of inflow and revenue under its new segment structure, with the note that FY22 to FY25 numbers are indicative:
| Year | Order inflow (₹ crore) | Revenue (₹ crore) | Book to bill (our calculation) |
|---|---|---|---|
| FY22 | 1,92,997 | 1,56,521 | 1.23 |
| FY23 | 2,30,528 | 1,83,341 | 1.26 |
| FY24 | 3,02,812 | 2,21,113 | 1.37 |
| FY25 | 3,56,631 | 2,55,734 | 1.39 |
| FY26 | 4,35,590 | 2,85,874 | 1.52 |
Five straight years above 1, and rising each year. That’s why the order book has kept swelling. It stood at ₹8,53,514 crore on September 30, 2026, against ₹6,67,047 crore a year earlier. Divide the latest order book by FY26 revenue and you get roughly three years of work. Use trailing twelve-month revenue instead (FY26 revenue, minus H1 FY26, plus H1 FY27, which comes to ₹3,00,904 crore by our maths) and it’s about 2.8 years.
Why the group number can mislead: split it by segment
Here’s where most quick readings of results go wrong. A conglomerate’s group ratio is an average of very different businesses. L&T’s Q2 FY27 segment table shows it clearly (our calculations, inflow ÷ net segment revenue):
| Segment | Q2 FY27 inflow (₹ crore) | Q2 FY27 revenue (₹ crore) | Book to bill |
|---|---|---|---|
| Infrastructure & Utilities | 35,509 | 25,133 | 1.41 |
| Energy – Conventional | 78,413 | 17,285 | 4.54 |
| Energy – Green | 6,558 | 11,493 | 0.57 |
| Manufacturing & Products | 5,778 | 4,480 | 1.29 |
| Technology, Platforms & Services | 14,807 | 14,826 | 1.00 |
Three observations jump out.
One segment carried the quarter. Energy – Conventional booked more than four and a half times its quarterly revenue. The presentation says the record inflow was led by ultra mega and mega orders in this segment. Strip it out and the rest of the group booked ₹69,252 crore against ₹61,465 crore of revenue, a ratio of about 1.13. Still above 1, but a very different picture from 1.88.
Green energy was below 1. At 0.57, the Energy – Green segment billed more than it booked this quarter. Business Standard reported the segment’s inflow fell 45% year-on-year. One quarter below 1 is not alarming on its own, especially as the segment’s order book stood at ₹1,43,597 crore, but it’s the line to watch next quarter.
For some businesses the ratio means nothing. Technology, Platforms & Services comes out at almost exactly 1, and in Financial Services the presentation’s order inflow figure (₹5,307 crore) is the same as the segment’s revenue. Services and lending businesses don’t carry a multi-year backlog the way an EPC contractor does, so for them inflow is just revenue by another name. Don’t let them dilute or flatter the group number in your head.
One mega contract can push a quarter’s book to bill above 4. Always ask which segment, and how many orders, made up the number.
How to use the ratio when reading results
We’d treat book to bill as a direction-finder, not a verdict. Some practical rules:
- Look at trailing four quarters or full years. Big orders land lumpily. A single quarter at 0.7 after three at 1.5 says little. Four quarters in a row below 1 says a lot.
- Read it with the order book. A company with three years of backlog can live with a weak quarter. One with eight months of backlog cannot.
- Check execution as well. A high ratio can also mean the company is billing slowly. If revenue growth is sluggish while orders pile up, ask whether there are execution bottlenecks, land or approval delays, or working capital stress. Our piece on capacity utilisation covers the factory-side version of that question.
- Check margins of the new orders. Winning a lot of work at thin margins can inflate the ratio while hurting future profit. Management commentary on the earnings call is usually the only place you’ll get hints on this.
- Check where the orders come from. L&T said international orders were 63% of Q2 FY27 inflow. Geography, client type and payment terms all change how bankable a backlog is.
For the broader routine of reading a results release line by line, start with our guide on how to analyse quarterly results of a company, then add the book to bill check for any company that reports order inflow.
Where the book to bill ratio applies, and where it doesn’t
The ratio earns its keep in businesses that sign contracts well before they deliver: EPC and infrastructure contractors, capital goods and power equipment makers, defence suppliers, shipbuilders, railway wagon and coach makers, and some IT services firms that disclose deal wins. In all of these, signed orders today become revenue over the next one to five years.
It’s close to useless for consumer companies, banks, retailers or most pharma businesses. A soap maker doesn’t carry an order book. A bank’s “inflow” is its loan disbursement, which is a different animal altogether.
One more caution. Don’t assume two companies count order inflow the same way, for instance on when an order enters the book or how joint venture orders are treated. Before you compare their ratios, read the footnotes and definitions in their investor presentations.
The short version: divide inflow by revenue, compare it over several periods, break it down by segment, and pair it with the size of the order book. Done that way, the book to bill ratio is one of the few numbers in a results release that tells you something about next year rather than last quarter.
Disclaimer: This article is for information and education only and is not investment advice. Please do your own research or consult a SEBI-registered investment adviser before making any investment decision.





Leave a Reply
Join the conversation
Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.
Sign up to comment Log in