Open any set of telecom results and one number gets more attention than almost any other: the average revenue per user. ARPU in telecom results moves share prices, and that makes sense once you see how much sits behind that one figure: pricing, the mix of customers, how many weak SIMs got cleaned out, and even the choice of formula the company uses. Read it carelessly and it will mislead you.
We’ll go through how ARPU is calculated, why the number TRAI publishes is not the same as the one in an operator’s investor presentation, and how to tell a good ARPU increase from a hollow one. The worked examples use made-up companies; the industry figures come straight from TRAI’s latest performance indicators report.
In this article
- What ARPU in telecom results actually measures
- Why TRAI’s ARPU and the company’s ARPU don’t match
- What goes into the Rs 187.12
- Prepaid, postpaid, private and PSU: the splits that surprise people
- How to read a rise or fall in ARPU
- Data usage and per-GB realisation: the other side of ARPU
- A checklist for reading ARPU in a results release
What ARPU in telecom results actually measures
The idea is simple. Take the revenue earned from subscribers over a period, divide it by the number of subscribers, and you get what an average user brings in. As Wikipedia’s entry on average revenue per user puts it, the measure is total revenue divided by the number of subscribers, and most telecom carriers work it out per month.
The fiddly part is the denominator. Subscribers come and go every day, so a single snapshot can’t be used without distortion. The fix is to use the average number of subscribers during the period, for example the opening and closing base averaged out. That one choice matters more than most investors realise, as the first example shows.
Indian operators report quarterly, but they quote ARPU as a monthly figure. So the quarter’s revenue is divided by three before it is divided by subscribers. When a results note says “ARPU of Rs 200”, it means about Rs 200 per user per month, not per quarter.
Worked example 1: one quarter, three answers
Say a hypothetical operator, Company A, reports mobile service revenue of Rs 27,000 crore for the quarter. It started the quarter with 450 million subscribers and ended with 460 million.
- Monthly revenue: Rs 27,000 crore divided by 3 is Rs 9,000 crore, or Rs 90,000 million.
- Average subscribers: (450 + 460) / 2 = 455 million.
- Monthly ARPU on the average base: Rs 90,000 million / 455 million = about Rs 197.80.
Now use the closing base of 460 million instead and the same revenue gives about Rs 195.65. Use the opening base of 450 million and it is exactly Rs 200.00. Same company, same quarter, same revenue, and the answer moves by more than Rs 4 depending only on which subscriber count goes underneath. When a fast-growing operator quietly divides by the opening base, its ARPU looks a little better than it is. That is why you always check the footnote that defines the metric.
Why TRAI’s ARPU and the company’s ARPU don’t match
This trips up a lot of people. TRAI publishes an industry ARPU every quarter in The Indian Telecom Services Performance Indicators report. For the April-June 2026 quarter, released on October 12, 2026, TRAI puts the all-India monthly ARPU for wireless services at Rs 187.12. Operators, meanwhile, publish their own ARPU figures in their quarterly results, and they rarely line up with TRAI’s.
TRAI explains the gap itself in a footnote. Each operator has its own method. One, it says, divides service revenue by the average number of subscribers during the quarter. Another divides operating revenue from its P&L by the average subscriber base of the current and previous quarter. TRAI’s own number is quarterly revenue adjusted for interconnect usage charges and roaming settlement charges, divided by average subscribers in the quarter. The report says these different methods result in TRAI’s ARPU being lower than what an operator would declare in its quarterly results or present to investors and rating agencies.
So the practical rule is this: compare an operator’s ARPU only with its own past ARPU, or with a rival that uses the same definition. Don’t line up Company A’s investor-deck figure against TRAI’s industry number and conclude A is “above average”. It may simply be using a friendlier formula.
An ARPU number without its definition is half a number. The trend inside one company tells you far more than a comparison across companies that count differently.
What goes into the Rs 187.12
TRAI’s report breaks the industry ARPU into its pieces, and the breakdown is worth a look because it shows where the money really comes from. For the quarter ending June 2026, per subscriber per month:
- Revenue from data usage in the home service area was Rs 164.65, or 85.52% of total revenue from home subscribers.
- Revenue from calls was Rs 13.70 (7.12%), and SMS just Rs 0.30 (0.16%).
- Total revenue from home subscribers came to Rs 192.53.
- Add Rs 18.67 from inroamers and interconnect charges received, and gross revenue is Rs 211.21.
- Subtract Rs 24.09 of net inter-operator settlement charges payable, and you land at the net ARPU of Rs 187.12.
Two things stand out. First, Indian mobile ARPU is now overwhelmingly a data number; voice and SMS are close to a rounding error. Second, the gap between gross and net shows why the definition matters. An operator quoting a figure before settlement charges will look Rs 20-odd richer per user than TRAI’s net figure.
Prepaid, postpaid, private and PSU: the splits that surprise people
Most of us assume postpaid users pay more. TRAI’s numbers for the June 2026 quarter say otherwise at the industry level: monthly ARPU was Rs 200.72 for prepaid and Rs 114.26 for postpaid. TRAI’s report doesn’t explain the reason in that table, so we won’t guess at one. The lesson for an investor is narrower and more useful: don’t assume a rising postpaid share automatically lifts ARPU. Check what the company’s own postpaid base is made of before you give it credit.
The ownership split is starker. ARPU for private operators rose 1.35% quarter on quarter, from Rs 192.31 to Rs 194.90, while ARPU for the PSU operators fell 4.63%, from Rs 92.26 to Rs 87.99. The private players earn more than twice as much per user, about 2.2 times on these figures.
Geography matters too. Blended ARPU in Circle A areas was Rs 205.88, against Rs 139.22 in the Metros. So a company growing faster in one kind of circle than another can see its reported ARPU drift without any change in pricing.
How to read a rise or fall in ARPU
An ARPU increase is only good news if it comes from the right place. There are three usual drivers, and they deserve very different reactions.
Driver 1: tariff hikes and upgrades
This is the healthy kind. Users pay more for the same service, or move to bigger plans. Revenue and ARPU rise together, and subscriber numbers hold up.
Watch the timing, though. Take a hypothetical operator with a monthly ARPU of Rs 180 that raises effective realisation by 15% (to Rs 207), with the change hitting only the last month of a quarter. The quarter’s average works out to (180 + 180 + 207) / 3 = Rs 189, a rise of just 5%. The rest of the benefit shows up in the next quarter. And because prepaid users often sit on long-validity packs, the real lag can be longer than one month. Investors who expect the full hike in the first quarter end up disappointed by a number that is actually on track.
Driver 2: SIM consolidation, the hollow kind
Here is the trap. Company Y earns Rs 6,000 crore in each of two quarters, with no revenue growth at all. In the first quarter its average base is 120 million; in the second, low-paying secondary SIMs drop off and the average base falls to 110 million.
- Quarter 1 ARPU: Rs 2,000 crore per month / 120 million = about Rs 166.67.
- Quarter 2 ARPU: Rs 2,000 crore per month / 110 million = about Rs 181.82.
That is a 9.1% jump in ARPU with zero growth in revenue. The headline reads well, the business hasn’t moved. Shedding loss-making users can be sensible, but it is not the same as pricing power, and it can’t repeat forever.
Driver 3: mix shift
If a company adds lots of users in low-ARPU circles or segments, its average falls even if every existing user pays more. A falling ARPU in that case can sit alongside a growing business. The reverse is also true.
The quick test: put ARPU growth next to revenue growth and subscriber growth. If ARPU is rising while revenue is flat, someone is leaving, not paying more.
Worked example 2: putting the three numbers together
Suppose a hypothetical Company Z reports mobile revenue up 6% on the previous quarter and its average subscriber base up 2%. ARPU growth is roughly 1.06 / 1.02 – 1, or about 3.9%. That is the combination you want: more users, and each paying more. Compare that with Company Y above, where ARPU rose 9.1% but revenue didn’t grow at all. On ARPU alone, Y looks better. On the business, Z clearly is.
Data usage and per-GB realisation: the other side of ARPU
ARPU tells you what a user pays. It doesn’t tell you what they consume. TRAI’s report helps here too. Average revenue realisation per GB of wireless data fell from Rs 7.51 in the March 2026 quarter to Rs 7.13 in the June 2026 quarter, a decline of 5.07%. Over the same period, total wireless data usage rose from 77,953 PB to 84,424 PB, which works out to about 8.3% more data in one quarter.
Put those together with ARPU rising 1.19% quarter on quarter (from Rs 184.91 to Rs 187.12) and the picture is clear: users are paying a little more each month but consuming a lot more data, so the price of each GB keeps sliding. For an operator, that matters because network costs grow with traffic. ARPU growth that lags data growth means the company has to keep spending on capacity just to stand still on margins. That is where the link to capacity utilisation comes in, a concept that works for telecom networks as much as for factories.
On a year-on-year basis, TRAI’s industry ARPU rose 3.11%, from Rs 181.47 in the June 2025 quarter to Rs 187.12. Average minutes of use per subscriber per month fell from 959 to 933 over the latest quarter. Voice, in other words, is not where the growth is.
A checklist for reading ARPU in a results release
- Find the definition. Which revenue is in the numerator (service revenue, operating revenue, gross or net of settlement charges)? Which subscriber base is in the denominator (average, opening, or two-quarter average)?
- Check whether the definition changed. A new formula can create a jump that has nothing to do with the business. TRAI’s own report notes that one operator’s wireless base was restated from the June 2025 quarter to include M2M connections, and earlier quarters were recalculated for comparison. Restatements like that are exactly what to look for.
- Line up ARPU, revenue and subscribers. All three should tell the same story.
- Allow for timing. A tariff hike in the middle of a quarter will show up over two or more quarters.
- Look at data usage and per-GB pricing. Rising ARPU with much faster traffic growth means higher network spending ahead.
- Compare like with like. Track a company against its own history, not against TRAI’s industry figure.
For a recent example of how a listed operator’s quarter reads, see our coverage of Jio Platforms’ Q2 results. And for the broader framework of revenue, margins, one-offs and guidance that ARPU fits into, our guide on how to analyse quarterly results of a company walks through the full process.
ARPU is a good number. It just isn’t a self-explanatory one. Read the footnote, check the denominator, and always ask whether users are paying more or simply fewer users are left.
Sources
- TRAI: The Indian Telecom Services Performance Indicators, April-June 2026 (released October 12, 2026), Section 2 and Tables 2.1, 2.2, 2.3 and 2.7
- Wikipedia: Average revenue per user (definition and calculation)
Disclaimer: This article is for education only and is not investment advice. Companies A, Y and Z and every rupee figure and percentage in the worked examples are hypothetical and calculated by us; industry figures are from TRAI’s report linked above. Consult a SEBI-registered investment adviser before making any investment decision.





Leave a Reply
Join the conversation
Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.
Sign up to comment Log in