A plant without the licences it needs is just a building. A food company without a food safety licence cannot legally sell a single packet. That is why we always turn to the page on government and other approvals in RHP filings before falling in love with an IPO story. It sits near the back of the red herring prospectus, it is mostly a long list of licence names and expiry dates, and almost nobody reads it. Yet it answers a blunt question: does this business actually have permission to do what it says it does?
This guide walks through what SEBI requires in that section, how it links to the risk factors and the objects of the issue, and how to read the table with a worked example.
In this article
Where SEBI puts government and other approvals in an RHP
The rule sits in the SEBI (Issue of Capital and Disclosure Requirements) Regulations, 2018, in the version amended up to March 21, 2026. Schedule VI, Part A sets out what an offer document must contain. Item (12) is “Legal and Other Information”, and inside it, sub-item (B) is headed “Government approvals”. It asks for two things.
- Investment approvals and the regulator’s disclaimer. The company discloses investment approvals (from the Government of India, the RBI and so on, as applicable), any letter of intent or industrial licence, and a declaration of the Central Government, the RBI or any regulatory authority about non-responsibility for the company’s financial soundness or the correctness of its statements.
- Every approval that matters for running the business. The document must list all government and other approvals which are material and necessary for carrying on the business and operations of the issuer and its material subsidiaries.
Read the second point slowly. It is not “every piece of paper the company holds”. It is the approvals that are material and necessary for operations, and it covers material subsidiaries too. So if a holding company’s real plant sits inside a subsidiary, that subsidiary’s licences belong on this page.
The first point trips up new readers. The regulator’s “non-responsibility” declaration simply means that holding a licence is not a government stamp on the company’s finances. A bank licence from the RBI tells you the bank may operate. It tells you nothing about whether its loan book is clean.
A licence is permission to operate, not a certificate of quality. The approvals page tells you whether the business is allowed to run, never whether it will make money.
The two other places approvals show up
The approvals chapter does not stand alone. SEBI’s rules push the same subject into two other parts of the document, and a careful reader checks all three against each other.
Risk factors
Under item (5) of the same Schedule, SEBI lists subjects that must “necessarily be disclosed wherever applicable” as risk factors. The very first on that list is material statutory clearances and approvals that are yet to be received by the issuer. So if a key approval is pending, the company cannot bury it in the back; it has to appear as a risk. Our guide to risk factors in an RHP covers how that section is ordered and how to read it.
Objects of the issue
When IPO money is going into land, the objects-of-the-issue disclosures ask whether the company has applied for or received all the approvals pertaining to that land. If none are needed, the company has to say so in an affirmative statement. For a project funded by the issue, the same section asks for details such as the location, the plant and machinery, and infrastructure facilities for raw materials and utilities like water and electricity. That is where a pending approval for a new plant becomes a timing risk for your money, not just a footnote.
What a typical approvals table looks like
Many RHPs split this chapter into neat buckets: approvals relating to the offer itself, incorporation details, tax registrations, labour-related registrations, business and plant-level licences, and then a list of approvals applied for but not yet received, and approvals that have expired with renewal applications pending. The exact headings vary by company and by the law firm drafting the document, so don’t expect identical layouts across IPOs.
The sector decides what really matters. Take food. According to the Food Safety and Standards Authority of India, Section 31(1) of the FSS Act, 2006 requires every food business operator in the country to be licensed, and the procedure is governed by the Food Safety and Standards (Licensing and Registration of Food Business) Regulations, 2011. For a packaged-food IPO, those licences, plant by plant, are the heart of the approvals page. For a lender, it would be its RBI licence or registration. For a hospital chain, the licences tied to each facility. The skill is knowing which handful of lines can actually shut the business down. The laws behind those licences are summarised in a different chapter, which we cover in key industry regulations in an RHP.
Worked example: reading the approvals page of a made-up snack maker
Let’s build a hypothetical company so the method is clear. Call it Saffron Crunch Foods. It makes packaged snacks at three plants and is raising money in an IPO partly to build a fourth. Everything below, the company, its plants and its licence status, is invented for illustration.
Its approvals chapter, simplified, reads like this:
| Approval | Plant | Status in the RHP |
|---|---|---|
| Food safety licence | Plant 1 | Valid |
| Food safety licence | Plant 2 | Valid |
| Food safety licence | Plant 3 | Expired; renewal applied for |
| Factory licence | Plant 3 | Valid |
| Building and environmental clearances | New Plant 4 | Applied for, not yet received |
| Food safety licence | New Plant 4 | To be applied for after construction |
Here is how we would work through it.
Step 1: Match plants to revenue. Go to the business section and see how much of the output comes from each plant. Suppose the RHP says Plant 3 is the largest. Now the “expired, renewal applied for” line on Plant 3 is no longer a routine admin item. It touches the biggest chunk of the business.
Step 2: Read what the law says about renewals. Whether a licence stays in force while its renewal is pending depends on the specific law and the authority involved. The RHP should explain the position for each case. If the document is silent, or if the application was filed after expiry, that is a sharper question for the company, and you should look for it in the risk factors.
Step 3: Cross-check the risk factors. Plant 4’s pending clearances must show up in risk factors, because they are material approvals not yet received. Look at how the company frames the risk. A good RHP names the approval, the authority and what happens to the timeline if it is delayed. A vague line saying “we may not receive approvals in time” with no detail tells you very little.
Step 4: Tie it to the objects of the issue. If, say, a large slice of the IPO money is earmarked for Plant 4, then a delay in its clearances means that money sits idle, gets parked in deposits, or the project schedule slips. Check the estimated schedule of deployment in the objects section and ask whether it assumes approvals arrive on time.
Step 5: Check the litigation chapter. Regulatory notices and show-cause notices often sit in the outstanding litigation section, right next door. If Plant 3 has a pending notice from a food safety authority and an expired licence, the two lines together tell a story neither tells alone. Our explainer on outstanding litigation in a DRHP shows how that chapter is built.
After those five steps, Saffron Crunch looks like this: two plants clean, the largest plant running on a pending renewal, and the expansion story hanging on approvals that have not come yet. None of that is a reason by itself to skip the IPO. It is a reason to price in some delay and to watch the company’s post-listing disclosures.
The question is never “does the company have every licence?” It is “which missing or expiring licence could stop the plant that earns the most?”
Red flags and green flags on this page
A few patterns we look for when reading government and other approvals in an RHP:
- Long list of expired approvals with renewals pending. One or two is normal paperwork. A dozen across key plants suggests weak compliance processes.
- Approvals in the name of a different entity. If a licence still sits in the name of an old partnership firm or a group company, the RHP should explain the transfer. Gaps here can matter after a restructuring.
- Expansion money tied to approvals not yet applied for. Applied-for is one thing. Not-yet-applied-for on a project that the IPO is funding is a timing risk you should notice.
- Clean, specific disclosure. On the positive side, a company that lists each approval with the issuing authority, reference and validity, and explains each pending item, is usually one that runs its compliance seriously.
Limits of the approvals section
This chapter is a snapshot as of the date of the document. Licences expire and get renewed all the time, so the list can look different six months after listing. It also relies on the company’s own judgement of what is “material and necessary”, which means two companies in the same sector can present very different lengths of list. And a valid licence today says nothing about whether the regulator is happy with how the business is run; for that, you need the litigation chapter and the risk factors.
Still, few pages in the RHP are this practical. Five minutes here can tell you whether the growth plan depends on a government office moving quickly. For the wider process of evaluating a public issue, start with our IPO investing in India guide.
Disclaimer: This article is for educational purposes only and is not investment advice. The company, plants and licence statuses in the worked example are hypothetical and used only to explain the method. Disclosure rules and laws can change; always read the latest offer document and regulations, and consult a SEBI-registered investment adviser before making investment decisions.





Leave a Reply
Join the conversation
Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.
Sign up to comment Log in