Most people reading an IPO document go straight to the financials, the valuation and the objects of the issue. Few stop at the page on outstanding dues to creditors in RHP filings, which usually sits quietly inside the “Outstanding Litigation and Material Developments” chapter. That page is short. It is also one of the few places where a company has to tell you, in numbers, how many people it owes money to and how much of that is owed to small suppliers who are legally protected from being paid late.
We think it deserves five minutes of your time. Here is what SEBI actually requires a company to put there, what the MSME line means under the law that protects small suppliers, and how to read the table without over-reading it.
In this article
- What SEBI asks for: outstanding dues to creditors in RHP disclosures
- Materiality here is the board’s call, not a formula
- Why the MSME line carries extra weight
- A worked example with made-up numbers
- What we look for when we read this page
- Where this fits with the rest of the legal chapter
- What this page cannot tell you
What SEBI asks for: outstanding dues to creditors in RHP disclosures
The requirement comes from the SEBI (Issue of Capital and Disclosure Requirements) Regulations, 2018, in the version amended up to March 21, 2026. Schedule VI, Part A lists what goes into an offer document, and item (12), “Legal and Other Information”, has a sub-heading called “Outstanding dues to creditors”. It asks for three things:
- Creditors as per the board’s materiality policy. Based on the policy on materiality defined by the issuer’s board, the company gives details of creditors, including the consolidated number of creditors and the aggregate amount involved.
- A split between MSMEs and everyone else. Consolidated information on outstanding dues to micro, small and medium enterprises and to other creditors, separately giving the number of cases and the amount involved.
- Names, but only online. Complete details of outstanding overdues to material creditors, with the name and amount for each material creditor, have to be disclosed on the company’s website, with a web link to that page.
That third point trips people up. The RHP itself will usually carry only the counts and the totals. The creditor-by-creditor list of material overdues lives on the company’s website, and the RHP gives you the link. If you want names, you have to click through.
The same item adds a catch-all. If any of these litigations, material developments or dues to creditors arise after the offer document is filed, the facts have to be incorporated in the offer document. And if there are no such cases, the document must make a distinct negative statement saying so. A blank is not allowed; silence has to be spelled out.
Materiality here is the board’s call, not a formula
This is the part we find most interesting. For litigation, SEBI tightened things through an amendment effective March 8, 2025. “Other pending litigations” now have to be disclosed using the lower of the board’s materiality policy or a value test: 2% of turnover, 2% of net worth (unless net worth is negative), or 5% of the average absolute profit or loss after tax over the last three years, all measured on restated consolidated financials.
The creditor sub-item did not get that treatment. It still says “based on the policy on materiality defined by the board of directors”. So who counts as a “material creditor” is whatever the board decided and wrote into its policy. Two companies filing in the same month can use very different cut-offs, and both can be fully compliant.
Who counts as a material creditor is the board’s own choice. The threshold tells you as much about the company’s attitude to disclosure as the numbers do.
So the first thing we read on this page is not the total. It is the sentence that states the materiality threshold. A threshold that is a tiny slice of trade payables means many creditors get named on the website. A threshold set high enough that only a couple of creditors cross it gives you much less to look at. Neither is wrong under the rules, but the second one deserves a closer look at the rest of the balance sheet.
Why the MSME line carries extra weight
The MSME split is not just a classification exercise. Small suppliers have a specific statutory shield, and a company that owes them money for long is running up a cost that the law makes deliberately painful.
The Micro, Small and Medium Enterprises Development Act, 2006 sets out the rules in Chapter V, “Delayed payments to micro and small enterprises”:
- Section 15: the buyer must pay on or before the date agreed in writing with the supplier, or, if there is no such agreement, before the “appointed day”. Whatever the agreement says, the agreed period cannot exceed 45 days from the day of acceptance or deemed acceptance.
- Section 2(b): the “appointed day” is the day right after 15 days from acceptance or deemed acceptance of the goods or services.
- Section 16: if the buyer pays late, it owes compound interest with monthly rests at three times the bank rate notified by the Reserve Bank, and this applies notwithstanding anything in the contract.
- Section 18 and 19: the supplier can take the dispute to a Micro and Small Enterprises Facilitation Council, which is meant to decide within 90 days. A buyer that wants an award set aside in court generally has to deposit 75% of the award amount first.
- Section 22: a buyer whose accounts must be audited has to show, in its annual accounts, the principal and interest remaining unpaid to such suppliers at year end, interest paid for late payments, and interest accrued and still unpaid.
- Section 23: interest payable or paid under the Act is not allowed as a deduction when computing income under the Income-tax Act.
One nuance. The Act defines a “supplier” for these payment rules as a micro or small enterprise that has filed the memorandum the Act refers to. Medium enterprises are not in that definition. The SEBI disclosure, on the other hand, lumps micro, small and medium dues together. So the RHP’s MSME figure is a bit wider than the group the interest rules protect.
Put it together and the logic is straightforward. A growing MSME balance is not automatically a problem; a company buying more from small vendors will owe them more. But MSME dues that are overdue cost real money in penal interest, that interest can’t be deducted for tax, and the supplier has a fast-track forum to chase it. A company that leans on small suppliers to fund its working capital is borrowing at a steep rate without calling it borrowing.
A worked example with made-up numbers
Let us take a hypothetical issuer, call it XYZ Components, and imagine its RHP shows the following table. Every figure here is invented to illustrate the arithmetic.
| Type of creditor | Number of cases | Amount (Rs crore) |
|---|---|---|
| Dues to micro, small and medium enterprises | 412 | 38.6 |
| Dues to material creditors | 3 | 61.2 |
| Dues to other creditors | 1,950 | 140.4 |
| Total | 2,365 | 240.2 |
Say the RHP states that a creditor is material if the amount due exceeds 5% of total dues to creditors. Now let’s read it.
Step 1: check the threshold. 5% of Rs 240.2 crore is about Rs 12.01 crore. Three creditors cross it, and together they are owed Rs 61.2 crore, roughly 25.5% of all dues (61.2 divided by 240.2). That is concentration worth noting. Three counterparties hold a quarter of what the company owes its trade creditors. We would open the website link to see who they are: related parties, a single raw material supplier, a contractor?
Step 2: size the MSME bucket. Rs 38.6 crore spread over 412 cases is about 16.1% of total dues (38.6 divided by 240.2), and the average MSME balance is under Rs 10 lakh. Small tickets, many vendors. On its own that looks like a normal supply chain.
Step 3: find out how much of it is overdue. The RHP table gives outstanding dues, not necessarily overdue ones. For that we go to the restated financial statements and look for the MSME note required under Section 22. If that note shows principal unpaid beyond the appointed day plus interest accrued and unpaid, that is the number that matters.
Step 4: put a rough cost on delay. Suppose, purely for the arithmetic, that the bank rate were 6%. Three times that is 18% a year, or 1.5% a month compounded monthly. A Rs 10 lakh MSME invoice paid three months late would carry interest of about Rs 10,00,000 × (1.015³ − 1), which is roughly Rs 45,678. Now multiply that habit across hundreds of vendors and the leak becomes visible. The actual bank rate at any time is whatever the RBI has notified; the 6% here is only an assumption to make the formula concrete.
Outstanding is not the same as overdue. The RHP table gives you the first; the restated accounts usually tell you the second.
What we look for when we read this page
We keep a short checklist for this section. None of it needs a finance degree.
- The date the numbers are struck at. The table is a snapshot. Compare that date with the date of the latest restated balance sheet so you are comparing like with like.
- The materiality threshold and how it was set. Is it a percentage of trade payables, a fixed rupee figure, something else? A very high cut-off means fewer names online.
- Concentration among material creditors. If two or three names make up a large share of total dues, find out who they are through the website link.
- The MSME share over time. One snapshot says little. If the offer document or the company’s website lets you compare periods, a rising share of overdue MSME dues is a yellow flag on working capital.
- The MSME note in the restated financials. This is where principal and interest unpaid at period end should show up, because Section 22 asks audited buyers to report it.
- Cash flow from operations. A company that reports growing profits while stretching creditors may be flattering its operating cash flow. Read the payables line in the cash flow statement next to this table. Our piece on debtor days covers the receivables side of the same working capital story.
- The negative statement. If the company says there are no such dues to report, the document has to say that explicitly. If you can’t find either a table or a clear negative statement, ask why.
Where this fits with the rest of the legal chapter
The creditor disclosure sits right after the litigation disclosures in the same chapter, and it helps to read them together. A supplier who isn’t being paid often becomes a supplier who files a case. If you see an MSME council reference or a commercial suit by a vendor in the litigation section, check whether that vendor’s dues also show up among the material creditors. Our guide to outstanding litigation in a DRHP walks through that chapter, and the risk factors section of an RHP is where a company should flag working capital pressure if it is material.
For the bigger picture of how to approach a public issue, start with our IPO investing in India guide.
What this page cannot tell you
It is worth being honest about the limits. The table is a point-in-time number. A company can pay down a pile of supplier dues just before the snapshot date and let them build again after. The disclosure also does not grade the creditors’ patience; a large balance with a long-term strategic supplier on agreed credit terms is very different from a pile of disputed invoices. And because materiality is the board’s own definition, cross-company comparisons on the “material creditors” line are shaky.
Used properly, though, this page does something few others in the RHP do. It shows how the company treats the people who supply it, in rupees, and it points you to the names. A business that pays small vendors on time usually has its working capital in order. One that doesn’t is quietly paying for it.
Disclaimer: This article is for educational purposes only and is not investment advice. The company, figures, materiality threshold and bank rate in the worked example are hypothetical and used only to explain the method. Disclosure rules and laws can change; always read the latest offer document and regulations, and consult a SEBI-registered investment adviser before making investment decisions.





Leave a Reply
Join the conversation
Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.
Sign up to comment Log in