Most people skip the key industry regulations in RHP section. We get why. It reads like a law syllabus, it runs for pages, and it rarely has a single number in it. But this is the chapter that tells you which permissions a company needs simply to stay open, and which regulator can change its economics with one circular. If you are applying to an IPO, that matters at least as much as the growth story in the business overview.
This guide walks through where the section sits in a red herring prospectus, what SEBI actually requires, how it links to the approvals and litigation chapters, and how to read it with two worked examples. The rulebook we lean on throughout is the SEBI (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended up to March 21, 2026, which SEBI publishes as a consolidated PDF.
In this article
- Where key industry regulations sit in an RHP
- What the section usually tells you, and what it doesn’t
- The companion chapter: government and other approvals
- Worked example 1: a packaged snacks maker
- Worked example 2: a lender heading to the market
- Red flags worth slowing down for
- A ten-minute routine for any RHP
- Bottom line
Where key industry regulations sit in an RHP
Schedule VI of the ICDR Regulations lists what an offer document must contain. Its Part A covers disclosures in the offer document and letter of offer. Item (10) of Part A is titled “About the Issuer”, and it is laid out in a fixed order:
- (A) Industry Overview, where, if the document carries an extract of an industry report, the complete report has to be provided as a material document.
- (B) Business Overview, covering the primary business, plant and technology, products and services, business strategy, capacity and capacity utilisation, intellectual property rights and material properties.
- (C) Key Industry-Regulations (if applicable).
- (D) History and Corporate Structure of the issuer.
So the regulation chapter is placed right after the company has told you what it does and right before it tells you where it came from. That placement is a hint about how to use it. Read the business overview first, list what the company actually does (makes, stores, sells, lends, imports, exports), and then check whether the regulation chapter covers each of those activities.
Notice how thin the SEBI line is. Item (10)(C) is just a heading with “if applicable” in brackets. SEBI does not hand issuers a template of laws to list. The company and its lawyers decide which rules are “key”, which is exactly why you should read the section with a bit of scepticism. If you want the earlier part of the same chapter explained, our guide to the industry report in an RHP covers item (10)(A).
What the section usually tells you, and what it doesn’t
In practice the chapter is a summary of the laws, rules and policies that apply to the company’s business in India, grouped by theme. You will commonly see headings for industry-specific laws, environmental laws, labour and employment laws, tax laws, foreign investment and trade rules, and intellectual property laws. Each law gets a paragraph or two in plain description.
What the chapter is not: it is not a statement that the company complies with all of them. It describes the rules. Whether the company holds the permissions those rules demand is answered in a different chapter, which we come to next. Think of the regulation section as the exam syllabus and the approvals section as the mark sheet.
The regulation chapter is the syllabus. The approvals chapter is the mark sheet. Read them side by side, never one without the other.
A couple of concrete examples of how sector rules show up. A food company in India deals with the Food Safety and Standards Authority of India, which works under the Food Safety and Standards Act, 2006, and food businesses that manufacture, store, transport or distribute food need an FSSAI registration or licence depending on their size and nature. A factory that discharges effluent or emits smoke falls under the Water (Prevention and Control of Pollution) Act, 1974 and the Air (Prevention and Control of Pollution) Act, 1981, the two laws the Central Pollution Control Board works with. When you see a manufacturer’s RHP, you would expect pollution-control consents to feature somewhere. When you see a packaged food company, you would expect food safety licensing. If they are missing, ask why.
The companion chapter: government and other approvals
Item (12) of Schedule VI Part A is “Legal and Other Information”. It has two parts that you should read with the regulation chapter open in another tab.
Item (12)(B), Government approvals, asks for two things. First, investment approvals (from the Government of India or RBI, as applicable), any letter of intent or industrial licence, and the declaration of the Central Government, RBI or any regulatory authority about non-responsibility for the company’s financial soundness or the correctness of its statements. Second, and more useful for us, all government and other approvals that are material and necessary for carrying on the business and operations of the issuer and its material subsidiaries.
That second line is where the mark sheet lives. RHPs typically present these approvals in a list or table, and the useful part for an investor is the set of approvals that have expired, been applied for, or not yet been applied for. A pending renewal is routine. A pending consent for the company’s main plant, or for a plant that the IPO money is meant to build, is not routine at all.
Item (12)(A), Outstanding Litigations and Material Developments, is the other companion. Regulatory action shows up here: show-cause notices, penalties, proceedings by authorities. We have a separate walk-through of outstanding litigation in a DRHP if you want the detail.
Worked example 1: a packaged snacks maker
Let’s take a made-up company, call it Example Snacks Ltd, to show the method. The numbers and facts below are illustrative only and do not describe any real issuer.
Step 1, list the activities from the business overview. Say the business overview tells us it runs three manufacturing units, sells through distributors and e-commerce, exports to the Gulf, and plans to use part of the fresh issue to build a fourth plant.
Step 2, map each activity to a rule in the regulation chapter. Manufacturing food points to food safety law and FSSAI licensing. Running plants points to pollution-control law and factory, labour and safety laws. Exporting points to foreign trade rules. Selling packaged goods points to packaging and labelling rules. Online selling may bring in consumer protection rules for e-commerce.
Step 3, cross-check against the approvals chapter. Now we open item (12)(B). Suppose it shows valid food safety licences for units 1 and 2, a renewal application pending for unit 3, and pollution-control consents “to be applied for” for the proposed fourth plant.
Step 4, judge what matters. The unit 3 renewal is worth noting but not alarming on its own; renewals are part of running any regulated factory. The fourth plant is different. If the plant is a stated object of the issue and its consents have not even been applied for, the timeline in the objects chapter carries more risk than the headline suggests. You would then go to the risk factors and check whether the company flags this, and how candidly.
Step 5, look for what’s absent. If the business overview mentions exports but the regulation chapter says nothing about foreign trade rules, that’s a gap. It may be a drafting choice, but it is a fair question for the analyst calls or for your own judgement.
Worked example 2: a lender heading to the market
Second illustrative case: Example Finance Ltd, a non-bank lender. Again, everything here is a teaching example, not a real company.
For a lender, the regulation chapter is usually long and dominated by one regulator. The questions shift too. With a manufacturer we asked “do they have the licence?”. With a lender, the licence (its registration with the regulator) is usually a given; the sharper question is “how much of the business model depends on rules that the regulator can tighten?”. Capital requirements, provisioning norms, limits on certain kinds of lending and rules on how loans are recovered all sit in this chapter.
Here is how we would read it:
- Note the category of registration the RHP describes, and check the approvals chapter confirms it is held.
- Pick the two or three rules that touch the core product. If 70% of an example lender’s book were unsecured personal loans (an illustrative figure), any rule on unsecured lending is the one to read slowly.
- Go to the risk factors and see whether the company quantifies its sensitivity to those rules, or only gestures at “regulatory changes”.
- Check litigation and material developments for any regulatory inspection findings or penalties.
The habit is the same as with the snacks maker. Map activity to rule, rule to approval, approval to risk. The details change by sector; the method doesn’t.
A long list of laws tells you the business is regulated. The short list of rules that touch the core product tells you how fragile the business is.
Red flags worth slowing down for
- Boilerplate with no sector depth. If the chapter spends pages on general labour and tax laws and a paragraph on the sector’s own regulator, it isn’t telling you much.
- Approvals pending for the objects of the issue. Money raised for a project that still lacks key permissions can sit idle. Read this alongside the objects of the issue chapter.
- Material subsidiaries without their approvals listed. SEBI’s approvals item covers the issuer and its material subsidiaries. If the operating business sits in a subsidiary, its permissions should appear.
- A recent regulatory action in the litigation chapter that relates to a rule the regulation chapter describes in a sentence. The mismatch in emphasis is telling.
- Risk factors that don’t mention the sector’s main rule. Cross-check with our guide to risk factors in an RHP.
A ten-minute routine for any RHP
You don’t need a law degree. You need a pen and about ten minutes.
First, write down every activity from the business overview in one line each. Second, tick off which of them the key industry regulations chapter covers. Third, open the government approvals section and mark anything expired, pending or “to be applied”. Fourth, scan litigation for any regulator’s name. Fifth, check the risk factors for the one rule you think matters most. If all five line up, the company has been straight with you on regulation. If they don’t, you’ve found the question to ask before you bid.
One more practical tip. The DRHP and RHP can differ, because SEBI’s observations and the passage of time change things. If you read the draft early, re-read the approvals section in the final RHP; a pending approval may have come through, or a new one may have been added. Our explainer on the red herring prospectus covers how the two documents relate, and the IPO investing in India guide pulls all the chapters together.
Bottom line
The regulation chapter rarely moves a grey market price, and it will never be the most exciting part of a prospectus. That’s the point. It tells you the conditions under which the business is allowed to exist, and when you pair it with the approvals and litigation chapters, it shows you where the company is exposed. Ten minutes on it can save you from buying into a project that the rules haven’t cleared yet.
Disclaimer: This article is for educational purposes only and is not investment advice. The companies in the worked examples are hypothetical. Please read the offer document and consult a SEBI-registered investment adviser before making investment decisions.





Leave a Reply
Join the conversation
Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.
Sign up to comment Log in