Dalal Street Blogs provides information for educational purposes only and does not constitute investment advice. Please consult a SEBI-registered investment adviser before making any investment decisions.
CAUTION: Dalal Street Blogs publishes market news and educational content only. We do not promote, recommend or endorse any stock, and nothing here is a solicitation to buy or sell securities. Please consult a SEBI-registered adviser before investing.
Trading Strategy

Equity Curve Trading: Cutting Size When Your System Goes Cold

3875
By Dalal Street Blogs EditorialUpdated 8 min read

Every trader who has run a system for long enough knows the feeling. The rules haven’t changed, the setups look the same, and yet trade after trade gets stopped out. Equity curve trading is a simple answer to that stretch: instead of only judging each trade, you watch the line of your account balance itself, and you cut position size when that line turns down. You don’t abandon the system. You just stop feeding it full-size bets while it’s cold.

We’ll walk through what an equity curve is, how the filter works, a full 30-trade worked example in rupees, and the honest trade-off, because this rule costs you something too.

In this article
  1. What equity curve trading actually means
  2. Why the size of the hole matters so much
  3. Setting up an equity curve filter, step by step
  4. Worked example: 30 trades, ₹10 lakh account
  5. When the equity curve filter helps and when it hurts
  6. Common mistakes with equity curve trading
  7. A simple way to start this week

What equity curve trading actually means

Your equity curve is just your account value plotted after every trade (or every day). Start at ₹10 lakh, win ₹20,000, lose ₹10,000, and the curve goes 10,00,000, 10,20,000, 10,10,000. Nothing fancy.

Equity curve trading treats that line like a price chart. Most traders already put a moving average on Nifty to decide whether to be long. The idea here is to put a moving average on your own results. When the account sits above its recent average, the system is “working” and you trade normal size. When it drops below, the system is in a rough patch and you trade smaller, or in stricter versions, you only paper-trade until the curve recovers.

The logic leans on something many of us notice in our own trade journals: losses seem to bunch up. A breakout system has good months when markets trend and miserable ones when they chop sideways. If the bad stretches cluster, then reducing size during them should shrink the hole you dig.

You’re not switching the system off because you lost faith in it. You’re turning the volume down until the market starts agreeing with it again.

Why the size of the hole matters so much

A drawdown is the fall in an account from its peak to its lowest point, usually quoted as a percentage of the peak. Investopedia’s explainer on drawdowns makes the key point well: the deeper the fall, the bigger the gain you need just to get back to where you were.

The maths is unforgiving. Our own calculation:

  • A 10% drawdown needs about an 11.1% gain to recover.
  • A 20% drawdown needs a 25% gain.
  • A 30% drawdown needs roughly 42.9%.
  • A 50% drawdown needs 100%.

That’s why traders obsess over drawdown more than over return. Say one system makes 18% a year with a 10% worst fall is far easier to live with than one that makes 22% but once dropped 35%. Most people quit the second one at the bottom, which is the worst possible moment to quit. Equity curve trading is a tool aimed squarely at that problem. It tries to make the worst stretch shallower, even if it trims a bit of upside.

Setting up an equity curve filter, step by step

There are many versions. Here’s a plain one that you can run in a spreadsheet next to your trade journal.

1. Fix your base risk per trade

Decide what fraction of the account you risk on a normal trade, meaning the rupee loss if the stop-loss is hit. Keep it small and fixed; we’ll use 1% in the example. If you haven’t set this yet, our guide on risk management in trading covers how stop distance and position size fit together.

2. Record equity after every closed trade

Not after every day, not including open trades. Closed trades only, so the series is clean and you can’t fudge it with a hopeful mark-to-market number.

3. Pick a lookback for the average

We’ll use a 10-trade simple average of the equity readings. Short lookbacks react fast but flip often. Long ones are steadier but slow to notice trouble. If you trade a few times a week, we’d start somewhere between 10 and 30 trades and test from there.

4. Write the rule before you need it

Before every new trade, compare the latest equity figure with the average of the last 10 readings. If equity is below the average, risk 0.5% instead of 1%. If it’s back above, return to 1%. That’s the whole rule. The key is that it’s mechanical. If you leave room for “this setup looks too good to size down”, you’ve rebuilt the very discretion the filter is meant to remove.

Worked example: 30 trades, ₹10 lakh account

All figures here are hypothetical and calculated by us. Meet Arjun, a swing trader with ₹10,00,000. His system wins some trades at 1.5R to 3R (R being the amount risked) and loses 1R on the rest. Over 30 trades his results in R were:

+2, −1, +1.5, −1, +2.5, −1, −1, +3, −1, +1, −1, −1, −1, +2, −1, −1, −1, −1, +1.5, −1, −1, +2, +3, −1, +2, −1, +2.5, +1, −1, +2.

Look at trades 11 to 21. That’s eleven trades with just two winners. Every trader has a patch like this.

Version A: always risk 1%

Arjun risks 1% of current equity on every trade, no filter. His account peaks at ₹10,49,949 after trade 8, then grinds down through the cold patch to ₹9,92,905 after trade 21. That’s a drawdown of about 5.43%. He then recovers strongly and finishes trade 30 at ₹10,90,175.

Version B: equity curve filter

Same trades, same order, but with the 10-trade average rule. Through the first 12 trades nothing changes, because equity stays above its average. Then after trade 12, his equity of ₹10,28,952 falls below its 10-trade average of roughly ₹10,33,628, and the filter kicks in. From trade 13 to trade 23, he risks only 0.5%.

Here’s what that does. Loss number 13 costs him ₹5,145 instead of about ₹10,290 at full size. Each of the four straight losses from trade 15 to 18 costs around ₹5,100 instead of ₹10,000-plus. His lowest point arrives after trade 21 at ₹10,10,935. Measured from the same ₹10,49,949 peak, that’s a drawdown of about 3.72%, against 5.43% without the filter. Roughly a third of the pain is gone.

Now the catch. Trades 22 and 23 are the start of the recovery, a +2R and a +3R. Because the filter is still in half-size mode, Arjun collects ₹10,109 and ₹15,316 on them, about half of what full size would have paid. The equity line only climbs back over its average after trade 23, and he goes back to 1% from trade 24 onwards. He finishes at ₹10,83,083.

The filter bought Arjun a shallower hole at the cost of about ₹7,000 in final profit. Whether that’s a good deal depends on whether the shallower hole keeps you trading.

The scorecard

MeasureAlways 1%With equity curve filter
Ending equity after 30 trades₹10,90,175₹10,83,083
Peak before the cold patch₹10,49,949₹10,49,949
Lowest point after the peak₹9,92,905₹10,10,935
Maximum drawdownabout 5.43%about 3.72%
Trades taken at half size011 (trades 13 to 23)

That’s the honest result. The filter didn’t make Arjun more money. It made the bad stretch less bad, and it gave back some return because it was late to notice the recovery. Every moving-average-based filter has this lag. It reacts after the turn, both going in and coming out.

When the equity curve filter helps and when it hurts

It helps most when losing streaks genuinely cluster. Trend-following and breakout systems can behave this way, because their edge depends on whether the market is trending at all. A long sideways phase in Nifty can produce a string of false breakouts, and size reduction during that phase saves real money.

It hurts when results are close to random in order. If a win is just as likely after a loss as after a win, the filter will mostly cut size right before the next winner and restore it right before the next loser. You’d pay the lag cost without getting the protection. Mean-reversion systems, whose wins and losses can alternate, may fall into this bucket.

So test it on your own record first. Take your last 50 or 100 closed trades and run both versions in a spreadsheet, the way we did above. If the filter cuts your maximum drawdown meaningfully while giving up only a little return, it may be worth adopting. If it gives up a lot of return for a small drawdown change, skip it. Our piece on Monte Carlo simulation in trading shows how to reshuffle the same trades many times, which tells you whether a result like Arjun’s is luck of the order or something sturdier.

Common mistakes with equity curve trading

Switching off completely and never coming back. Some versions stop live trading when the curve drops and keep a paper record until it recovers. That’s fine on paper. In practice, many traders never restart, because the paper trades “don’t feel real”. Half size keeps you in the game and keeps the record honest.

Fiddling with the lookback after a bad month. If a 10-trade average flagged you too late, it’s tempting to switch to 5. Do that a few times and you’ve curve-fitted the filter to your recent past. Pick a lookback, test it on old data, and leave it alone for a decent sample.

Using it to hide a broken system. A filter manages size during normal rough patches. It can’t rescue a strategy whose edge has gone. If your equity line sits below its average for months and the half-size losses keep piling up, the question isn’t sizing any more. It’s whether the system still works. Out-of-sample checks like walk forward analysis are the right tool there.

Doing the opposite on hot streaks. The mirror image, sizing up because the line is above its average, is a different idea with different risks. We cover it in the anti-martingale strategy post. Mixing the two without a cap on maximum size can leave you biggest exactly when the streak ends.

A simple way to start this week

Open your trade journal. Add one column for equity after each closed trade and another for the 10-trade average. Add a third that says “full” or “half”. Then just watch it for a month without changing anything in your actual sizing. See how often it would have flipped, and whether those flips would have saved or cost you money.

If the numbers look good on your own history, start using it with the rule written down somewhere you’ll see before every order. That’s all equity curve trading needs: a line, an average and the discipline to follow what they say.

Sources

Disclaimer: This article is for education only and is not investment advice. Arjun and all figures in the worked example are hypothetical and calculated by us. Trading in equities and derivatives involves risk of loss; consult a SEBI-registered investment adviser before making any investment decision.

Leave a Reply

Join the conversation

Commenting is open to registered readers. Sign up with just your email — no password needed, and it takes under a minute.

Sign up to comment Log in